Browse all practice questions for the Materials Science and Engineering Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Materials Science and Engineering Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Residual porosity in ceramic bodies has what effect on mechanical properties?
  • The existence of vacancies in crystals is explained thermodynamically because vacancies:
  • Which statement best defines forging?
  • Which statement describes brittle fracture?
  • Cross-linking in polymers is typically achieved by what kind of bonds?
  • Ceramics may have which of the following structures?
  • Ductility is defined as which of the following?
  • Which of the following is NOT a purpose of the matrix phase in fiber-reinforced composites?
  • Which property is a measure of ductility in tensile testing?
  • What are the three steps to fatigue failure?
  • The liquid metal is forced into a mold under pressure and at a relatively high velocity and allowed to solidify with the pressure maintained. A two-piece permanent steel mold or die is employed; when clamped together, the two pieces form the desired shape.
  • Which of the following is not a type of ceramic product?
  • In solid solution strengthening, which condition enables substitutional solid solution strengthening?
  • Diffusion is the transport of mass by atomic motion; many processes rely on diffusion within a solid or between phases.
  • Which statement best describes a self-interstitial defect in metals?
  • What are the four components involved in the lifecycle of materials design?
  • The pattern is made from a wax or plastic that has a low melting temperature. Around the pattern a fluid slurry is poured that sets up to form a solid mold or investment. The mold is then heated, such that the pattern melts and is burned out, leaving behind a mold cavity having the desired shape. Example: jewelry and dental crowns and blades for gas turbines and jet engine impellers are investment cast.
  • Fatigue Life is defined as:
  • What is the term for the fraction of crystalline material in a polymer?
  • What describes the structure of a thermoset polymer?
  • Interdiffusion is the process by which atoms of one metal diffuse into another metal.
  • Which statement about vacancies in crystalline solids is true?
  • Yield Stress is defined as the stress at which a specific amount of strain (0.2%) occurs in the engineering tensile test.
  • Which of the following is a type of point defect in crystalline solids?
  • Which statement best describes slip planes in HCP metals relative to FCC/BCC metals?
  • Which statement best defines a slip system in crystalline materials?
  • Tensile Strength is defined as which of the following?
  • Which statement correctly links crystallinity and modulus?
  • For extrusion, a bar of metal is forced through a die orifice by a compressive force that is applied to a ram; the extruded piece that emerges has the desired shape and a reduced cross-sectional area.
  • Which property measures the amount of energy a material can absorb before fracture?
  • Which statement correctly describes bainite?
  • Which term marks the onset of plastic deformation, where elasticity ends and deformation cannot be recovered?
  • Fatigue failure is associated with what type of stresses?
  • What occurs during melting of a polymer?
  • In a fiber-reinforced composite, what is the dispersed phase?
  • Which statement describes crystallization tendencies of isotactic and syndiotactic polymers?
  • Which statement best describes molecular solids?
  • Which statement distinguishes interdiffusion from self-diffusion?
  • Increasing degree of crystallinity in polymers affects which properties?
  • What is the effect of reducing grain size on yield strength?
  • Which property is defined as the elastic modulus divided by density?
  • Diamond is an example of which solid type?
  • Vacancy diffusion involves an atom moving to which position?
  • What is the main benefit of a sandwich panel with a honeycomb core?
  • In a fiber-reinforced composite, what is the primary role of the matrix phase?
  • Which statement best describes polymer degradation as presented?
  • Among tacticities, which has the highest crystallinity generally?
  • Which statement is true about the relationship between degree of crystallinity and tensile modulus, and about CTE values?
  • Which statement correctly defines fatigue strength?
  • Cross-linked polymers are characterized by what kind of bonding between chains?
  • Which term describes extremely strong single-crystal reinforcement with very small diameter and high length-to-diameter ratio, and is known for being very expensive and difficult to disperse?
  • Which solid type is NaCl (table salt) an example of?
  • Which list correctly identifies the four polymer morphologies?
  • Ice is an example of which solid type?
  • Modulus of Elasticity is defined as which of the following?
  • Which of the following are possible materials for the fiber phase in fiber-reinforced composites?
  • Which statement best captures the effect of crystallinity on modulus?
  • What is the coordination number for atoms in a face-centered cubic lattice?
  • Which statement about branched polymers is true?
  • For an edge dislocation, the slip direction is along the direction of applied shear stress.
  • Creep is defined as what?
  • In a body-centered cubic lattice, the edge length a is related to the atomic radius R by which expression?
  • The expendable pattern is a foam that can be formed by compressing polystyrene beads into the desired shape and then bonding them together by heating. Alternatively, pattern shapes can be cut from sheets and assembled with glue. Sand is then packed around the pattern to form the mold. As the molten metal is poured into the mold, it replaces the pattern, which vaporizes. The compacted sand remains in place, and, upon solidification, the metal assumes the shape of the mold.
  • What is the typical construction of a sandwich panel and what benefit does it provide?
  • Crazes in polymers are regions of localized deformation and microvoids that can affect ductility.
  • Fibrous reinforced composites are classified according to matrix type into which three categories?
  • Which of the following is an example of a fiber-reinforced composite?
  • In metallurgical annealing, what is one primary effect?
  • Which property is defined as tensile strength divided by density?
  • Toughness is best described as:
  • Engineering stress is defined as the force divided by what area?
  • Which reinforcement type is described as metals or alloys with relatively large diameters?
  • What is a Unit Cell?
  • What is the effect of increasing the degree of crystallinity on tensile modulus?
  • Which test method determines the stress-strain behavior and fracture strengths of ceramic materials?
  • Which factor increases both tensile modulus and tensile strength in semicrystalline polymers?
  • Thermal Shock Resistance is defined as which of the following?
  • Hardness is defined as a measure of the resistance of a material to permanent deformation.
  • Why are crystalline ceramics typically better thermal conductors than noncrystalline ceramics?
  • Which statement is NOT true about ceramics?
  • APF is defined as which ratio?
  • What does the 0.2% offset represent in yield testing?
  • Which statement about martensite is correct?
  • Branched polymers feature side branches. What is the typical effect on density, stiffness, and toughness?
  • Which description characterizes a self-interstitial defect?
  • Which factors affect the modulus of elasticity?
  • How is corrosion defined?
  • Ceramic materials are described as which of the following?
  • Compared with FCC and BCC crystals, how do HCP metals typically differ in plastic deformability and why?
  • Which statement is true about fracture of polymers?
  • Thermal shock is defined as fracture due to rapid temperature change.
  • Engineering strain is defined as the change in length divided by what?
  • In a fiber-reinforced composite, what roles does the polymer matrix play?
  • What is the typical relationship between compressive and tensile strength in ceramics?
  • Which of the following is NOT typically classified as a metal fabrication technique?
  • Which description best matches plastic deformation on a stress–strain curve?
  • Which statement best defines an alloy?
  • Which corrosion prevention strategy involves forming a thin, adhering oxide layer that slows corrosion?
  • Which material type tends to deteriorate primarily due to dissolution or swelling when exposed to a liquid solvent?
  • Which statement defines the coefficient of thermal expansion?
  • What is the effect of strain hardening on a ductile metal?
  • Which statement about elastic deformation is true?
  • Which statement about crystallization and tensile strength in isotactic and syndiotactic polymers is correct?
  • For a given fiber-matrix combination, the critical length depends on which factors?
  • Ceramic materials can exhibit which structural possibilities?
  • What are the units of toughness in a material?
  • As temperature increases, what happens to the modulus of elasticity?
  • During recrystallization (hot working), what is the typical effect on defect density, strength, and ductility?
  • What is a crystalline solid?
  • Which of the following is NOT a factor influencing thermal shock resistance?
  • Which statement best describes ionic solids in the solid state?
  • Fatigue Failure occurs at relatively low stress levels in structures subjected to fluctuating and cyclic stresses. Which statement best describes fatigue failure?
  • How many atoms are contained in a unit cell of a face-centered cubic lattice?
  • Which structural feature of PVC contributes to its higher crystallinity relative to polystyrene under similar conditions?
  • Polymer crystallinity refers to what kind of packing of chains?
  • In a face-centered cubic lattice, the edge length a is related to the atomic radius R by which relation?
  • Holes are
  • Why do point defects in ionic crystals form?
  • Why is it important for engineers to know the ductile to brittle transition temperature?
  • Which material class has the largest coefficient of thermal expansion values?
  • Which statement describes the common principle behind strengthening mechanisms?
  • How many atoms are contained in a body-centered cubic unit cell?
  • What are the two modes of fracture described?
  • Which mechanism strengthens metal by introducing impurity atoms that create lattice distortion?
  • Which form of polypropylene has higher crystallinity?
  • Interstital solid solution strengthening occurs when which of the following happens?
  • Among polypropylene, which tacticity form exhibits higher thermal conductivity: isotactic or atactic?
  • The yield stress is best described as:
  • Which factor is intrinsic (internal) affecting diffusion?
  • Specific tensile stress is defined as the tensile strength of a material divided by its density.
  • In an FCC unit cell, how many nearest neighbors does each atom have?
  • Thermal shock is characterized by which phenomenon?
  • During recrystallization, as temperature increases, what happens to defect density, ductility, and strength?
  • Which statement best defines the fatigue limit?
  • Which process is an example of forming of metals by plastic deformation?
  • What is the glass transition temperature in polymers?
  • Which has larger thermal conductivity, fused silica or polycrystalline silica?
  • Which statement describes metallic solids?
  • Which statement best describes hot-working operations?
  • Flexural strengths measured from three-point transverse bending tests may be determined for which cross-sectional shapes?
  • Covalent bonds in polymers rupture due to
  • Dispersion strengthened materials have particulate phase...
  • What is the coordination number for a lattice point in a body-centered cubic structure?
  • Which of the following is NOT a type of structural composite?
  • In Large Particle particle reinforced composites, the matrix transfers some applied stress to the particles.
  • Which diffusion mechanism involves an atom moving from a lattice site into a neighboring vacant lattice site?
  • The inter-atomic bonding in most ceramics is which of the following?
  • Which of the following is commonly categorized as a polymer product type?
  • Which diffusion mechanism is typically responsible for diffusion of very small atoms in solids?
  • Higher crystallinity generally leads to increases in which property(s)?
  • What is the effect of increasing molecular weight on tensile strength according to the material?
  • Which property, when increased, tends to improve thermal shock resistance?
  • Forged articles have outstanding grain structures and the best combination of mechanical properties. Which is a typical forged article?
  • If a sample has very low crystallinity, relative to a higher crystallinity sample, its modulus is expected to be:
  • How does molecular weight affect tensile modulus and tensile strength of polymers?
  • Which defects are considered imperfections in ceramics?
  • Which description best defines spheroidite?
  • Self-interstitial defects in metals are generally much less probable than vacancies because the interstitial site is smaller than the atom.
  • Which statement correctly describes the typical molecular structures of thermoplastics and thermosets?
  • Which unit cell type is associated with the stacking sequence ABCABCABCABC in its close-packed layers?
  • In a body-centered cubic unit cell, how many atoms are in contact with the central atom?
  • A Frenkel defect involves which pair?
  • Which of the following is NOT one of the four types of crystalline solids?
  • In fiber-reinforced composites, significant reinforcement is achieved only if which condition is satisfied?
  • Which lattice type has a coordination number of 8?
  • What is the primary role of fibers in a fiber-reinforced composite?
  • Which process involves passing a piece of metal between two rolls to reduce thickness?
  • In some thermoplastics, the crack-formation process may be preceded by crazing.
  • Fibers are normally polymers or ceramics that may be either amorphous or polycrystalline. Which term correctly names this class?
  • Self-diffusion occurs when diffusing atoms are the same type.
  • Circular shapes, as well as I-beams and railroad rails, are fabricated using grooved rolls.
  • Metal fabrication techniques are normally preceded by which process?
  • Drawing is the pulling of a metal piece through a die having a tapered bore by means of a tensile force that is applied on the exit side. A reduction in cross section results, with a corresponding increase in length. The total drawing operation may consist of a number of dies in a series sequence.
  • Grain boundaries are what type of defect?
  • In ceramics under deformation, which atomic-scale process is associated with brittle fracture?
  • Schottky defect is defined as which of the following?
  • Which polymer has the larger thermal conductivity when both are linear and syndiotactic with the same degree of polymerization: PVC or polystyrene?
  • During Stage II, which phase experiences plastic deformation?
  • Interstitial diffusion is associated with impurities such as hydrogen, carbon, nitrogen, and oxygen because their atoms are small enough to fit into interstitial positions.
  • What is a vacancy defect in a crystal lattice?
  • Diffusion coefficient is exponentially dependent on which variable?
  • Fine pearlite is pearlite with relatively thin lamellae. Which option best states this?
  • Dislocations are what type of defects?
  • Hot Working (Crystallization) occurs when deformation is performed at temperatures which are:
  • Which hardness test is described as inexpensive and non-destructive and uses a relatively softer indenter?
  • What is the purpose of annealing?
  • Which statement best describes the purpose of strengthening mechanisms?
  • Coarse pearlite refers to pearlite with relatively thick lamellae. Which option correctly describes this?
  • Creep vs Fatigue: which statement correctly contrasts them?
  • Which term denotes the deteriorative processes in polymeric materials, including swelling, dissolution, and chain scission?
  • With sand casting, probably the most common method, ordinary sand is used as the mold material. A two-piece mold is formed by packing sand around a pattern that has the shape of the intended casting.
  • Which statement best describes thermoplastic polymers?
  • Which of the following is a function of the matrix phase in composites?
  • Network polymer is formed by what?
  • Which form occurs when two different metals are electrically coupled in an electrolyte?
  • Which of the following describes the coefficient of thermal expansion?
  • Which tacticity form has alternating side groups along the chain?
  • Particle reinforced composites are classified into two categories: Large Particle and Dispersion strengthened.
  • How is the Burgers vector oriented with respect to the dislocation line for edge, screw, and mixed dislocations?
  • Which of the following statements about cold rolling is true?
  • In Large Particle particle-reinforced composites, the particulate phase is...
  • How does molecular weight affect the tensile modulus of polymers according to the material?
  • Which component comes last in the lifecycle of materials design?
  • Why does increasing crystallinity increase stiffness in a polymer?
  • Which statement explains why increasing crystallinity increases stiffness?
  • Which form of corrosion is the combined action of chemical attack and mechanical wear due to fluid motion?
  • Which are the two main forging classifications?
  • What is the proportional limit?
  • Which statement describes a reason composites do not fail catastrophically when some fibers fail?
  • Time is an important parameter in annealing procedures because which of the following is true?
  • Which statement best describes an alloy?
  • Fracture strength point is the stress at which the material begins to fracture.
  • Elastic deformation is a material deformation by a force that returns to its original dimensions after the force is removed.
  • Grain boundary is a surface imperfection that separates crystals of different orientations in a polycrystalline aggregate.
  • If a steel plate has a tensile strength of 500 MPa and is subjected to 787 MPa, what happens first?
  • Which statement correctly describes heating behavior of thermoplastics versus thermosets?
  • Which statement describes network polymers?
  • Thermosetting polymers are characterized by what?
  • Higher crystallinity increases thermal conductivity because of which mechanism?
  • What does the modulus of resilience Ur represent?
  • Which statement best defines a composite material?
  • Yield Strength is defined as which of the following?
  • What is the significance of Stage I in the failure of a composite?
  • Structural composites are classified into two types: Laminates and Sandwich Panels.
  • Slip plane is the crystallographic plane along which the dislocation line traverses.
  • Higher degree of crystallinity equals
  • In metals, heat is primarily transported by
  • Increasing crystallinity in a semicrystalline polymer typically results in ...
  • Which statement about coefficient of thermal expansion is supported by the material?
  • How would you describe the relationship between crystalline order and rigidity?
  • Which description best characterizes thermosetting polymers?
  • Which type yields isotropic properties?
  • Among crystalline solids, which type typically conducts electricity well in the solid state?
  • Why are ceramics generally harder and more brittle than metals?
  • Which statement best describes linear polymer structure?
  • Fracture failure is defined as what?
  • Which material class tends to have the largest coefficient of thermal expansion values?
  • If a material has very low crystallinity, its modulus relative to a material with higher crystallinity is:
  • What are the two primary diffusion mechanisms in crystalline solids?
  • Which factor would increase diffusion rate, as an extrinsic factor?
  • What are the two types of charge carriers in insulators and semiconductors as described?
  • Which statement best describes toughness?
  • Yield strength is commonly defined using an offset corresponding to which strain value?
  • Which of the following is NOT typically a factor in choosing a metal fabrication method?
  • For a screw dislocation, the slip direction is perpendicular to the applied shear stress.
  • Which statement best describes bainite?
  • Noncrystalline ceramics have lower heat transport largely due to
  • Which statement correctly describes martensite?
  • The Burgers vector for a mixed dislocation is oriented how relative to the dislocation line?
  • Which sequence correctly describes the typical annealing process?
  • Covalent-network solids are characterized by which description?
  • In laminated composites with stacked fiber-reinforced sheets at 0 and 90 degrees, what is the primary benefit?
  • What does the Burgers vector represent?
  • Casting is a fabrication process in which a completely molten metal is poured into a mold cavity having the desired shape - upon solidification, the metal assumes the shape of the mold but experiences some shrinkage. A number of different casting techniques are commonly employed, including sand, die, investment, lost-foam, and continuous casting.
  • Heat transfer in polymers is primarily through which mechanism?
  • Which mechanism strengthens a metal by increasing grain boundary area that hinders dislocation motion?
  • Crevice corrosion occurs where there is localized depletion of oxygen. Where is this most likely to occur?
  • Tensile strength is the stress at which condition?
  • Which factor increases the electrical resistivity of metals?
  • Which has larger thermal conductivity, pure silver or sterling silver (92.5% Ag, 7.5% Cu)?
  • Why are ceramics resistant to corrosion?
  • Specific tensile modulus is defined as the elastic modulus of a material divided by its density.
  • What does thermal conductivity measure?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy